| Part Number: | ULO | - | PCB455A | - | 2 | F | C | W | 6 |
|---|---|---|---|---|---|---|---|---|---|
| Explanation: |
Brand ULO - ULO |
Family PCB455A - 2.0mm SANW crimp connector family; order required components separately |
Contacts 2–15 - Number of contacts |
Connector Type F - Female |
Termination C - Crimp |
Colour W - White |
Plating 6 - Tin |
ULO-PCB455A is a SANW connector family with 2.0mm pitch and 2 to 15 positions. The components are a female housing and separate crimp contacts. Select the housing count, housing colour and contact finish for the cable assembly.
| Component | Supply selection |
|---|---|
| Female housing | 2–15 positions; white or transparent |
| Crimp contact | Tin or full gold-flash plating; select the required contact quantity separately |
PCB455A identifies the family. Individual component suffix numbers and a complete assembly bill of materials are unspecified. Housing and contact selections do not imply a prewired assembly or a separate mating PCB header.
| Characteristic | PCB455A |
|---|---|
| Rated current | 1A |
| Rated voltage | 250V |
| Core wire range | 24–18AWG |
| Contact impedance | ≤30mΩ |
| Insulation impedance | ≥1000MΩ |
| Dielectric withstand test | 500VAC for 1 minute |
| Operating temperature | -25°C to +85°C |
| Storage temperature | -25°C to +85°C |
| Thickness reference | 1.6mm |
| Insulator | Nylon 66, material group I |
| Material flammability grade | UL94V-0 |
| Contact material | Copper alloy |
A wire-insulation outside-diameter range and crimp tooling dimensions are unspecified. The 1.6mm thickness reference does not define a PCB hole pattern.
| Field | Code and meaning |
|---|---|
| Contact count | 2–15 |
| Connector type | F: female |
| Termination | C: crimp |
| Housing colour | W: white; T: transparent |
| Contact plating | 6: tin; 8: full gold flash |
The contact drawing includes sections A–A and B–B. The plan-view references are 4.80mm, 1.4mm, 1.55mm and 0.95mm, with a 5.20mm vertical envelope. Section B–B shows 5.7mm length and a 0.9mm reference. These are drawing dimensions, not a crimp-height specification.
The housing is 6.00mm high and 3.50mm wide in section. A is the contact span and B is the housing length. All A and B values below are in millimetres.
| Positions | A | B |
|---|---|---|
| 2 | 2.0 | 5.2 |
| 3 | 4.0 | 7.2 |
| 4 | 6.0 | 9.2 |
| 5 | 8.0 | 11.2 |
| 6 | 10.0 | 13.2 |
| 7 | 12.0 | 15.2 |
| 8 | 14.0 | 17.2 |
| 9 | 16.0 | 19.2 |
| 10 | 18.0 | 21.2 |
| 11 | 20.0 | 23.2 |
| 12 | 22.0 | 25.2 |
| 13 | 24.0 | 27.2 |
| 14 | 26.0 | 29.2 |
| 15 | 28.0 | 31.2 |
