| Part Number: | ULO | - | PCB463 | - | 2 | M | V | W | 6 |
|---|---|---|---|---|---|---|---|---|---|
| Explanation: |
Brand ULO - ULO |
Family PCB463 - TJC2A connector family; order required components separately |
Contacts 1, 2, 3, 4, 5, 6 - Number of contacts |
Connector Type M - Male |
Mounting / Termination C - Crimp female terminal |
Colour W - White |
Plating 6 - Tin |
ULO-PCB463 is a TJC2A wire-to-board family with 1 to 6 contacts. Components comprise a female housing, separate female crimp terminals and a male vertical PCB header. Multipole versions use a 7.5mm first contact spacing followed by 5.0mm spacings.
| Contact count | Spacing arrangement | Components |
|---|---|---|
| 1 | Single contact | Single-pole female housing and male header; female crimp terminal |
| 2 | One 7.5mm interval | Female housing, male vertical header and female crimp terminals |
| 3–6 | First interval 7.5mm; remaining intervals 5.0mm | Female housing, male vertical header and female crimp terminals |
Match the wider first interval when orienting the cable housing and PCB header. Specify housing count, header count and terminal quantities separately. Complete cable assemblies and cable lengths are unspecified.
| Characteristic | PCB463 |
|---|---|
| Rated current | 1A |
| Rated voltage | 250V |
| Contact impedance | ≤30mΩ |
| Insulation impedance | ≥1000MΩ |
| Dielectric withstand test | 500VAC for 1 minute |
| Operating temperature | -25°C to +85°C |
| Storage temperature | -25°C to +85°C |
| Thickness reference | 1.6mm |
| Insulator | Nylon 66, material group I |
| Material flammability grade | UL94V-0 |
| Contact material | Copper alloy |
| Component | Conductor area | Wire gauge | Wire outside diameter |
|---|---|---|---|
| Female terminal | 0.13–0.5mm² | 26–20AWG | 1.3–2.7mm |
The terminal has a 13.1mm overall length, two 5.5mm longitudinal references, a 2.2mm × 2.2mm front-profile reference and a 0.8mm lower projection. Crimp tooling and stripping settings are unspecified.
| Field | Code and meaning |
|---|---|
| Contact count | 1, 2, 3, 4, 5 or 6 |
| Connector type | M: male; F: female |
| Mounting or termination | C: crimp; V: vertical through-hole |
| Housing colour | W: white |
| Contact plating | 6: tin; 8: full gold flash |
A is the contact span and B is the overall row length in the multipole drawings. All table dimensions are in millimetres. Single-contact A/B values are unspecified; use the separate single-pole profiles.
| Positions | Female housing | Male header | ||
|---|---|---|---|---|
| A | B | A | B | |
| 1 | Unspecified | Unspecified | Unspecified | Unspecified |
| 2 | 7.5 | 12.5 | 7.5 | 12.5 |
| 3 | 12.5 | 17.5 | 12.5 | 17.5 |
| 4 | 17.5 | 22.5 | 17.5 | 22.5 |
| 5 | 22.5 | 27.5 | 22.5 | 27.5 |
| 6 | 27.5 | 32.5 | 27.5 | 32.5 |
The female housing profile has an 18.5mm overall longitudinal reference and an 8mm upper reference. Its mating-face height references are 7mm overall and 5mm inner; the single-contact body width is 6.5mm.
The male profile shows a 15.56mm overall longitudinal reference, a 2.6mm base reference and a 3.86mm solder-tail reference. The contact diameter is Ø1.55mm and the single-pole base-side width is 4.65mm. The multipole header retains the wider first interval shown in the housing drawing.
